|Home||» Products||» Stain Remover||» Cleaning Agent|
J CLEAN is recently developed product to overcome the problem of vigorous cleaning of Jet Machine after every batch of dyeing. Conventional method is to use the combination of Hydrosulphite of Soda together+ with Caustic Soda Flakes in different proportion. Causes two types of problem:
1) This combination gives corrosion to the machine in long run hence making machine life short
2) The above, combination of chemicals does not get cleared with one wash which can affects the pH of the second batch and the process.
To over come this problem, we recommend J CLEAN, a single product, which can be used after batch at a ratio of 3-5 gpl. Along with Oxalic Acid or acetic acid 1-3 gpl. This will clear all the residues, fibres and scales in the machine immediately. This imparts good result in dyeing and keeps the machine free of corrosion.
We recommend following process for Jet Cleaning
Take water about 750 ltr. In jet machine add
J clean 3 to 5 gpl run for 20 minutes at 70 degree add 1-3 gpl oxalic acid / Acetic acid raise the temperature to 120 degree keep for 45 minutes drain & wash. Run the fabric to check cleaning action at 120 degree.
For polyester striping we recommend 5gpl. J Clean & 3 gpl. Acetic acid at 120 degree for 45 Minutes. Drain & give hydrogen peroxide treatment & wash.